Mitel WRV54G - Manual (Page 123)

113
Wireless-G VPN Broadband Router
Appendix E: Configuring VPN Tunnels
Configuring the Key Management Settings
Configuring the Key Management Settings
Configuring VPN Router 1
Following these instructions for VPN Router 1.
1. On the VPN screen, select 3DES from the Encryption drop-down menu.
2. Select SHA1 from the Authentication drop-down menu.
3. Keep the default Key Exchange Method, Auto(IKE).
4. For the PFS setting, select Enabled.
5. Select Pre-Shared Key, and enter a string for this key.
6. If you need more detailed settings, click the Advanced VPN Tunnel Setup button. Otherwise, click the Save
Settings button and proceed to the next section, “Configuring VPN Router 2.”
7. On the Advanced VPN Tunnel Setup screen, keep the default Operation Mode, Main.
8. For Phase 1, select DES from the Encryption drop-down menu.
9. Select MD5 from the Authentication drop-down menu.
Figure E-7: Diagram of VPN Tunnel between VPN Routers
Figure E-8: Security - VPN Screen (Key Management)