MITSUBISHI ELECTRIC Trium 110 User Manual

Page 17

Advertising

Silent and vibrate alert modes

To avoid disturbing others you can si-
lence the incoming ring and alert tones.

Turning on

is displayed when the silent

alert mode feature is activated.
is displayed when the

Vibrate

Vibrate then Ring

features are

activated.

Turning off

Hands free features

When you want to share your call with
an audience, or you are in your car, use
the “hands free” feature.

Turning the hands free feature on

When making a call:

When receiving a call:

Turning the hands free feature off

Muting

You can mute the microphone during a
call, e.g. when you want to talk to
someone nearby without the person on
the phone hearing.

Turning the microphone off

Turning the microphone on

Volume adjustment

To adjust the volume:

Sending DTMF tones

Some remote access services require
DTMF tones. These tones are used by
regular telephones when you dial and
when you answer questions from an
automated voice service. If you are in a
conversation and manually entering the
numbers, no extra configuration is nec-
essary. If, however, you want to send a
number stored in memory, you must set
DTMF to automatic.

Manually

To send individual DTMF tones di-
rectly from the keypad during a
conversation:

The tones are heard in the ear-

Use and and select one

of the countries. The

'+' sym-

bol and the country code (e.g

+31

for the Netherlands) are

displayed. It is then possible

to enter the phone number

and store it into one of the

phonebooks (Phone names /

SIM names) or delete it.

Press .
Select

Silent

Vibrate

Vibrate then Ring

Press .
Select

Ring

Vibrate &

Ring

If the ring tone volume is set to 0 a warning mes-
sage appears in the display.

Press

Speak.on

to turn the

hands free feature on during the

calling process.

Press

Speak.on

to accept the

incoming call.

Press

Speak.off

1
2

Press

Options

Select

Mute

and select

Yes

. A

warning message appears in

the display.

also appears.

Press

Options

Select

Unmute

. A warning

message appears in the dis-

play.

disappears.

A new call restores the microphone to on.

Use or to increase or

decrease the volume and

press OK .
Press

Exit

or wait 2 sec-

onds to return to the previous

display.