MITSUBISHI ELECTRIC Trium 110 - Manual (Page 21)

Th
e
m
en
u
21
text entry or Multitap text entry.Press
to swap between T9 text entry and the
Multitap method.
To enter text with T9:
Tips and operation
Example
To enter
Card in the display:
• Press and select Messages .
• Select Write new .
• Press : appears.
• Press .
A appears.
• Press . Ca appears.
• Press . Car appears.
• Press . Case appears.
If the displayed word is not the
one you want, press as many
times as necessary to view
Card .
• Press to exit from this example
and return to the stand-by display.
Multitap text entry
Press on to swap between T9 text
entry and the Multitap method.
To enter text with multitap:
The following table displays the
available English characters. Other
languages display different charac-
ter sets.
Press the key with the re-
quired letter only once.
Do not be put off if the char-
acter you want is not immedi-
ately displayed.
The ‘active’ word changes as
you type, so type to the end
of the word.
If your word is not displayed,
press for other matching
words.
If your word is not recog-
nised, press to swap to the
Multitap method to complete
the word.
Use or to locate the cur-
sor in the text to insert char-
acters or make corrections.
1. T9 may not be available in all languages.
2. During number and name entry a short press on
Clear deletes the last character. A long press clears
the whole display.
Key Action
Shift - upper/lower
case on next letter.
Caps lock/unlock if
you press and hold it.
Clear Clear or backspace
Press and
hold
Numbers
Space
Special character ta-
ble appears if you
press and hold it.
Another matching
word
Smart punctuation
Swap between T9 and
Multitap method
1
2
3
4
5
Press the key with the
required letter. If it is not the
first letter, press key repeat-
edly until the letter appears.
See the table that follows for
a key to character corre-
spondence.
Enter the next character. If
two characters are on the
same key, wait for the display
at the top of the screen to
clear or press before press-
ing the same key again.
To
access
special
charac-
ters (23
availa-
ble),
hold down . A table
appears. Press the key that
corresponds to the character.
Press
Clear briefly to cor-
rect back one letter. Hold
down to clear all text.
Press or to move the cur-
sor in the text to insert char-
acters or make corrections.
1
2
3
4
5