Motion Computing M1200 - Manual (Page 27)

Chapter
3 Motion M1200 and M1300 Tablet PC Software
Motion Computing M1200 and M1300 Tablet PC User Guide 24
Use the Recovery CDs when your system is completely down and you must
completely re-install. This procedure will overwrite everything on your
Motion M1200 or M1300. If possible, back up your data files onto a backup
CD or diskette before running this procedure.
To use the restore and recovery CD:
NOTE: Before you begin this procedure, you may want to print the
SYSTEM RECOVERY.TXT file found at the root of the restore and recovery CD.
This provides instructions for restoring your system. If your Tablet PC is down,
you will have to do this from another system.
1. Turn on your Tablet PC.
2. If possible, back up your data files onto a backup CD or diskette.
3. Insert the Recovery CD-1 of 2 (Windows XP Professional Service
Pack 1 CD) in your CDROM drive. The system should automatically
begin installing the operating system.
4. Follow the onscreen instructions for entering any information.
5. When prompted, insert the Recovery CD-2 of 2 (Windows XP Pro-
fessional CD 2).
6. Follow the onscreen instructions for entering any information.
Motion M1200 and M1300 Utilities and Drivers CD
The Motion M1200 and M1300 Utilities and Drivers CD contains installable
drivers and utilities. A Readme.txt file is included on the CD that contains
instructions for installing each driver and utility.
To install utilities and drivers:
1. Turn on your Tablet PC.
2. Insert the Utilities and Drivers CD into your CDROM drive.
3. On the CD and drivers file, browse to and open the Readme.txt file
for installation instructions.
4. Follow the installation instructions. In most cases, this involves
locating the executable file (.EXE) and running it from the CD while
following the onscreen instructions.
Motion M-Series Application CD
The Motion M-Series Application CD contains additional applications for
the Motion M1200 and M1300. To see the most current applications
available, go to the Motion Computing website at
www.motioncomputing.com. From the Products category, select Software to
view a list of Motion Computing software, third-party applications to
purchase, as well as free applications.