Trouble shooting, Installation – Magnadyne M5000CD User Manual

Page 11

Advertising
background image

SYMPTOM

CAUSE

SOLUTION

No power

The ACC Power Supply is not

Both the red and yellow

connected.

wires require power from the
power source.

The fuse is blown.

Replace the fuse.

Disc cannot be loaded,

Presence of disc inside the player.

Remove the disc in the player, and

played or ejected

replace it with another disc.

Disc was inserted upside down.

Insert the compact disc with the
label facing up.

Compact disc is extremely dirty or

Clean the disc or try playing a

disc is defective.

another disc.

Temperature inside the unit is

Allow the unit to cool off,

too high.

then try again.

Condensation.

Leave the player off for an hour, then
try playing it again.

No sound.

Volume is set at the minimum level.

Adjust volume to the desired level.

Speaker wiring is not properly connected.

Check the wiring connection.

Sound skips.

The installation angle is more

Adjust the installation angle to less

than 30 degrees

than 30 degrees.

Compact disc is extremely dirty or

Clean the disc or try playing a

disc is defective.

another disc.

The operation keys

The built-in microcomputer

Press the RESET button.

do not work.

is not operating properly

Front panel is not properly fixed

due to noise.

into its place.

The radio does not work.

The antenna cable is not connected.

Insert the antenna cable firmly.

The radio station automatic The signals are too weak.

Select a station manually.

does not work.

Trouble Shooting

Before going through the trouble shooting table below, check the wiring connection. If the problem persist,
consult your nearest service dealer.

Installation

Mounting Surface

Washer

Nut

Sheet Metal
Screw

Metal Strap

11

Advertising