Miller Electric Millermatic 212 - Manual (Page 5)

5
M-25 Replacement Gun
#169 594 10 ft. (3 m)
#169 596 12 ft. (3.7 m)
#169 598 15 ft. (4.6 m) standard
Gun shipped to run .030 –.035 inch
(0.8 – 0.9 mm) wire.
Spoolmate ™ 200 Spool Gun #300 497
Reliable and economical spool gun perfect
for hobbyists and light fabricators who
weld aluminum. Handles .030 –.035 inch
(0.8 – 0.9 mm) aluminum wires and
.023 –.035 inch (0.6 – 0.9 mm) steel/
stainless steel wires. Rated at 160 amps,
60 percent duty cycle with 20-foot cable
assembly. For detailed information, see
Spoolmate literature, Index No. M/1.47.
Spoolmatic ® 15A Spool Gun #195 156
Spoolmatic ® 30A Spool Gun #130 831
Ideal for aluminum welding jobs. Air-cooled,
1-pound spool gun with 15-foot (4.6 m)
or 30-foot (9.1 m) cable assembly. Rated
at 200 amps at 100 percent duty cycle.
For detailed information, see Spoolmatic
literature, Index No. M/1.73.
Dual EZ-Change ™ Low Cylinder Rack with
Elevated Gun and Cable Rack #300 337
Dual cylinder rack allows operators to easily
roll cylinders on and off the rack with no
lifting. Gun and cable rack keeps cables off
the floor and tangle free.
Elevated Gun and Cable Rack #300 335
For use with single cylinder rack.
(Included
with Dual EZ-Change Low Cylinder Rack.)
Protective Cover #195 142
Features side pocket.
(Not for use with Dual Cylinder Rack or
Elevated Gun and Cable Rack.)
Argon/Mixed Gas Regulator and Gas Hose
#195 050
(Order from Miller Service Parts.)
CO
2
Regulator/Flow Gauge #237 702
Required if using 100 percent CO
2
gas.
(Order from Miller Service Parts.)
Genuine Miller ® Accessories