Morphy Richards Cordless hand blender - Manual (Page 7)

7
Wall mounting
The charging stand can be wall mounted
or free standing. To wall mount find a
suitable position on the wall away from
concealed pipes and electricity cables.
Use the stand with blender in place to
determine the position most suitable, mark
a line on the wall across the top of the
charger stand. From this line mark a
horizontal line 15mm below, now mark 2
holes 40mm apart.
I
Using wall plugs and screws provided,
fix so screw heads are 5mm from the
surface. Hang the charger base and adjust
the depth position of the screws if required
to improve the fit.
Tips for blending
When processing foods with strong
colour (eg. carrots) the plastic parts of the
appliance may become discoloured. Use
cooking oil to clean any discoloured parts.
Permanent discolouration may happen, this
is acceptable.
Trouble shooting
• If the blender is not charging, red or
green light is not illuminated on charger.
Check the following:
• The charger adaptor · is fitted into the
charging socket fi.
• The motor body is correctly located on
the blender base unit.
I
Template Not to scale
48965 Rev 1 13/4/04 3:47 PM Page 7