Monster Cable SMARTVIEW 300S - Manual (Page 18)

14
Attaching Your TV to the TV Mounting Plate
and Hanging It on the Wall Plate
DO NOT lay your TV face down when attaching
the TV mounting plate. This may cause permanent
damage to your display. Lean it against a wall
or other solid surface.
Your TV should be unplugged before threading
any bolt or screw into the back panel.
Your mounting system features two sets of screws,
M4x15 and M5x15. The M5x15 is the longer of the two.
Disengage the LCD TV mounting plate from
the wall plate.
Locate the threaded inserts on your TV’s back panel.
Note the top and bottom sets of mounting holes on
the TV mounting plate. Determine which set aligns
perfectly with the four threaded inserts on your TV’s
back panel.
Determine which set of screws is the correct length
for your TV’s inserts. Test one of the screws to ensure
it’s the correct choice.
By hand, thread the screws through the TV mounting
plate’s mounting holes into the four TV inserts.
With a Phillips screwdriver, tighten down the screws
so the TV mounting plate is securely attached
to the TV.
With the help of a friend, lift your TV and slide the
attached mounting plate into the secure channel on
the wall plate.
1)
2)
3)
4)
5)
6)
7)