MITSUBISHI ELECTRIC WS-48515 - Manual (Page 83)

82 83
3
Appendix D: On Screen Information Displays
When you turn on the TV, change Devices, change Channels or when you press the INFO button
on the remote control the TV will display the current status. Below are the most common displays;
please note that seldom or never do all of the different status indicators appear at the same time.
1. Antenna or Device being viewed
2. Analog channel being received: If antenna being
viewed
3. Analog channel name (only if manually
programmed)
4. Signal Type being received
Possible:
Ant-1, Ant-2 or Input 1-3 – 480i
Component 1, 2 – 480i, 480p or 1080i
5. Screen format being used
Possible:
Analog 480i/480p signals – Standard, Expand,
Zoom, Stretch, Stretch Plus, Narrow
1080i signals - Standard, Wide Expand
6. Stereo and/or SAP being broadcast
7. V-Chip Ratings
8. Channel in SuperQuickView bank 2
9. Day and Time
10. Sleep Timer remaining time
11. PIP source and channel
Digital Program
1. Digital Major and Sub channel number
2. Digital Channel Name (only if broadcast)
3. Signal Type being broadcast/received
Possible:
SD 4:3, SD 16:9 or HD
4. Screen format being used
Possible:
SD 4:3 - Standard, Expand, Narrow
SD 16:9 or HD - Standard, Expand, Wide
Expand
5. Language(s) being broadcast
6. Program Name (if broadcast)
1. Status of DVCR or IEEE 1394 device
2. Counter of DVCR
3. Media type in DVCR
4. Special message line
(shows only when a special message is needed;
may be seen with Analog signals)
Analog Program
Digital IEEE 1394 Device
Ant-1 3 XXXX Ant-1 8
480i Standard
Stereo SAP
TV-PG DLSV
SQV2
Monday 11:00 AM
Sleep Timer: 30
1
2
4
5
7
8
6
9
10
Ant-1 42-1 XXXX-XX XXXXXXXXXXXX
HD Standard
English
TV-PG DLSV
SQV2
Monday 11:00 AM
Sleep Timer: 30
1 2
3
4
5
DVCR
HD Standard
English
TV-PG DLSV
Play 01:20:15
D-VHS
Monday 11:00 AM
Sleep Timer: 30
Special Message Line
6
11
3
2
1
4