Metra Electronics 99-7606 - Manual (Page 8)

6
99-7606
KIT ASSEMBLY
Slide the Double DIN radio into the
Double DIN bracket/radio housing
assembly and secure the radio to the
kit using the screws supplied with
the head unit. (Figure C) 3
Cut and remove center divider
from radio housing. (Figure A) 1
Snap the Double DIN trim plate
onto the housing/radio assembly.
(Figure C) 4
Snap the Double DIN brackets to
the inside edge of the radio hous-
ing. (Figure B) 2
DOUBLE DIN RADIO UNIT PROVISION
A
B
C
Continue to final assembly.