Metra Electronics 99-7606 - Manual (Page 9)

7
99-7606
KIT ASSEMBLY
Snap the Double DIN trim-plate onto
the housing/radio assembly.
(Figure C)
4
Snap the Double DIN brackets to
the inside edge of the radio hous-
ing. (Figure B) 2
Slide the stacked ISO units into the
Double DIN bracket/radio housing
assembly and secure the units to the
kit using the screws supplied with
the head units. (Figure C) 3
STACKED ISO HEAD UNITS PROVISION
Cut and remove center divider
from radio housing. (Figure A) 1
A
B
C
Continue to final assembly.