Basic connections, En – 10, Projector + av equipment – MITSUBISHI ELECTRIC XD300U User Manual

Page 10: Projector + dvd player or hdtv decoder, Speaker output is mono, For the computer input in the signal menu. • y, p

Advertising
background image

EN – 10

Basic connections

This projector can be connected to equipment such as PC, VCRs, video cameras and DVD players.

Important:
• Make sure that your equipment is turned off before connection.
• Plug in firmly and unplug by holding the plug, not by pulling the AC power cord.
• If connected units are set too close to one another, the image may be affected.
• Refer to the user manual of each component for details of connections.

Projector + AV equipment

Important:
• Match the color of video and audio plugs on the AV cable with the connections.
• S-video signals take priority over video signals. If you input both S-video signals and normal video signals at

the same time, the normal video input automatically is inhibited.

COMPUTER OUT

COMPUTER 2 / COMPONENT IN

COMPUTER 1 IN

COMPUTER

AUDIO IN

VIDEO 1

IN

VIDEO 2

IN

S-VIDEO

VIDEO

AUDIO

AC IN

AUDIO OUT

MAIN

MOUSE /RS-232C

to S-video output

to video output

to audio output

VCR etc.

to S-VIDEO (1or2) IN

to VIDEO (1or2) IN

to AUDIO (1or2) IN

Connect either one of these.

• Speaker output is mono.

Projector + DVD player or HDTV decoder

In the case of a DVD player equipped with a COMPONENT VIDEO output (525i / 625i), connect the DVD player
with the COMPUTER 2 / COMPONENT IN connector.

• When a DVD player is connected with the COMPUTER 1 IN connector, the image may not be projected cor-

rectly.

• When a 525p signal is inputted, select YC

B

C

R

/ YP

B

P

R

for the COMPUTER INPUT in the SIGNAL menu.

• Y, P

B

, P

R

is an example of the terminal names for a HDTV decoder.

• The terminal name is different depending on the connected equipment.
• Use mini D-SUB 15 pin-BNC conversion cable for connection.
• Some DVD players may not project the image correctly.
• When connecting with HDTV equipment which has R, G, B output, select RGB for the COMPUTER INPUT in

the SIGNAL menu.

• A TV60 or TV50 signal (except SCART input signal) corresponds to component video signal only. When the

RGB signal with 5 line form is inputted, the image will not be projected correctly.

COMPUTER OUT

COMPUTER 2 / COMPONENT IN

COMPUTER 1 IN

COMPUTER

AUDIO IN

VIDEO 1

IN

VIDEO 2

IN

S-VIDEO

VIDEO

AUDIO

AC IN

AUDIO OUT

MAIN

MOUSE /RS-232C

B

G R

C

B

(P

B

)

Y C

R

(P

R

)

HD/CS

VD

DVD player or HDTV decoder

No connection

BNC - RCA connector
(option)

Mini D-SUB 15 pin-BNC
conversion cable (option)

to AUDIO OUT

AUDIO cable

to COMPUTER AUDIO IN

to COMPUTER 2 IN

Advertising