MITSUBISHI ELECTRIC XD300U - Manual (Page 15)

EN – 15
ENGLISH
Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Auto power off time setting
1. Press the MENU button.
2. Press the $ or % button to select the INSTALLA-
TION menu.
3. Press the ENTER button (or
} button).
4. Press the
{ or } button to select AUTO POWER
OFF.
5. Press the $ or % button to adjust auto power off
time.
6. Exit the menu system by pressing the MENU but-
ton several times.
• If the menu operation is not working, turn off the
main power, wait about 10 minutes, and turn on the
main power again.
• The settings with mark, you should press the
ENTER button after selecting.
Menu operation
opt.
IMAGE
TV60
opt.
INSTALLATION
TV60
opt.
INSTALLATION
TV60
AUTO POWER
ON
AUTO POWER
OFF
OFF
OFF
AUTO POWER
ON
AUTO POWER
OFF
OFF
OFF
AUTO POWER
ON
AUTO POWER
OFF
OFF
30min
IMAGE CONTRAST ± 20
BRIGHTNESS
sRGB
± 20
ON, OFF
VIDEO COLOR MATRIX
COLOR ± 10
TINT ± 10
SHARPNESS ± 5
RED ± 30
CYAN ± 30
GREEN ± 30
YELLOW ± 30
BLUE ± 30
MAGENTA ± 30
SATURATION ± 10
RGB-TINT ± 20
CONTRAST R ± 15
CONTRAST B ± 15
BRIGHTNESS R ± 15
BRIGHTNESS B ± 15
EXPAND MODE EXPAND, REAL
RESET ALL OK
INSTALLATION
IMAGE REVERSE OFF, MIRROR, INVERT, MIRROR INVERT
AUTO POWER ON ON, OFF
SPLASH SCREEN
IMAGE CAPTURE
SETUP
ON, OFF
x1, x2, FULL
GLAY, RED, GREEN, BLUE, BLACK, WHITE, RED 50%, GREEN 50%, BLUE 50%
BACK COLOR
CAPTURE
BACK COLOR
SIZE
BLUE, BLACK, IMAGE
MUTE MODE BLACK, IMAGE
AUTO POWER OFF
CCS, CCS+DCDi, DCDi, OFF
FEATURE MENU POSITION UPPER LEFT, LOWER RIGHT
OFF, 5, 10, 15, 30, 60 min
VIDEO SIGNAL
VIDEO MODE
AUTO, OFF CINEMA MODE
AUTO, NTSC, PAL, SECAM, 4.43NTSC, PAL-M, PAL-N, PAL-60
LANGUAGE
SIGNAL HORIZ.POSITION 0 - 999
VERT.POSITION 0 - 999
TRACKING 0 - 9999
FINE SYNC.
USER
0 - 31
CLAMP POSITION 0 -127
CLAMP WIDTH 0 - 63
VERT. SYNC AUTO, OFF
SHUTTER(U) 0 - 20
SHUTTER(L) 0 - 20
0 - 20
0 - 20
COMPUTER
USER
STANDARD
OFF
LOW
COLOR TEMP.
USER
HOLD BEGIN 0 -15
END 0 -15
COMPUTER INPUT RGB, YC B C R / YP B P R
SHUTTER(LS)
SHUTTER(RS)
*5
*5
*5
*5
*5
*5
*5
*6
*6
*6
*6
*6
*1
*1
*2, *3
*3
*3,*4
ON, OFF SCART INPUT
OFF, CENTER, UPPER, LOWER ANAMORPHIC
*7
*3
*3
*3
*5
GAMMA MODE DYNAMIC, STANDARD, THEATER *1, *6
* 1: The item can not be selected when the sRGB is set to ON.
* 2: The item can not be selected with certain signals.
* 3: The item can not be selected when the source is selected
to COMPUTER
* 4: The item can not be selected when the VIDEO MODE is
not set to CCS or CCS+DCDi.
* 5: The item can not be selected when the selected source
is VIDEO or S-VIDEO.
* 6: Setting range is different with certain signals.
* 7: The item can not be selected when the source is not
selected to COMPUTER 2.
ON
OK
OFF
HIGH
GO
, English, Español, Deutsch, Français, Italiano, , , ,