MITSUBISHI ELECTRIC APRICOT 340 - Manual (Page 104)

I n s i d e t h e S y s t e m U n i t
APRICOT 340 OWNER’S HANDBOOK A/3
Opening the system unit
To remove the system unit cover:
1. Turn off both the system unit and the monitor.
2. If your AC power outlets have switches, set them to their Off
positions.
3. Unplug all power cords from rear of the system unit.
4. If the system unit has a caselock (on the right-hand side), turn
the caselock key to the unlocked position.
5. Unfasten the two casing screws.
6. Slide the top cover rearwards slightly, then lift it off.
Refitting the cover is the reverse of removal. Take effective anti-
static precautions while the top cover is off.
XDA-1