MITSUBISHI ELECTRIC APRICOT 340 - Manual (Page 89)

U p g r a d i n g
APRICOT 340 OWNER’S HANDBOOK 7/19
10. Connect the spare power cable in the loom behind the drive to
the drive’s power connector.
11. Connect the drive’s signal cable(s). Use the table on the next
page as a guide. See the documentation provided with the
upgrade kit for more information.
Before connecting any signal cable to the motherboard, check
the label on the inside of the system unit cover to make sure
that you are using the correct connector. Failure to do so may
damage the drive or the motherboard or both.
12. Replace the system unit cover.