Matsushita MBS0407S0 - Manual (Page 21)

Menu Item Adjustments / Configurations (alternatives)
VIERA
Link
VIERA Link Control Controls the connected Panasonic equipment
“Easy control only with VIERA remote control” (p. 29)
“Speaker control” (p. 29) •
You can also access VIERA Link Menu directly using the VIERA Link button on the
remote control. Speaker Selection
Picture
Menu
Basic picture mode (Dynamic / Standard / Cinema) •
Set for each input signal
Contrast, Brightness,
Colour, Sharpness
Adjusts colour, brightness, etc. for each picture mode to suit your taste
Tint
Adjusts tint of image •
For NTSC signal reception only
Colour Temperature Chooses the colour balance of the entire image (Cool / Standard / Warm)
CH Colour Set
Colour density varying between broadcast channels can be adjusted to three levels for
each reception channel •
Select the channel you want to adjust and set this function
Colour Management
Automatically adjusts colours to vivid ones (Off / On) •
Not valid on PC signal
P-NR
Picture Noise Reduction
Automatically reduces unwanted picture noise (Off / Weak / Strong / Auto) •
Not valid on HDMI or PC signal
MPEG NR
Automatically reduces noise for watching DTV, DVD and VCD
(Off / Weak / Mid / Strong)
3D-COMB
Automatically makes still pictures and slow pictures look more vivid (Off / On) •
For PAL or NTSC signal reception only •
Not valid on S-Video, components, PC and HDMI
Reset to Default Press the OK button to reset the present Picture Menu to the default settings
Sound
Menu
Basic sound mode (Music / News / Cinema) •
Set for each input signal
Bass Adjusts the output level of deep bass
Treble Adjusts the output level of high-pitch, shrill sound
Balance Adjusts volume level of right and left speakers
Headphone Volume Adjusts the volume of the headphones
Surround
Surround sound settings (Off / On) •
Switching is also possible by the Surround button on the remote control (p. 7)
Volume Correction Adjusts volume of individual channel or input mode
HDMI1 Input
Select to fit the input signal (Auto / Digital / Analogue) (p. 34)
Auto : Automatic detection of digital or analogue sound source
Digital : HDMI cable connection
Analogue : HDMI-DVI adapter cable connection •
HDMI input mode only •
HDMI2 terminal is for digital signal only •
No setting for HDMI2 available
Reset to Default Press the OK button to reset the present Sound Menu to the default settings
20
■
Menu list
How to Use Menu Functions