Matsushita MBS0407S0 - Manual (Page 29)

Setup Menu 2/2
Select
EXIT
Return
Refresh Rate
System Information
Software License
100Hz
Access
VIERA Link Settings Access
Banner Display Timeout 3 seconds
1 3 2
4 6 5
7 9 8
0
REC
VCR
DIRECT TV REC
ASPECT
INPUT
TEXT F.P. INDEX HOLD
PROGRAMME
VCR DVD
TV
VOL
R G Y B
RETURN
EXIT
MENU
OK
OPTION
MUTE
Select
EXIT
Return
VIERA Link On
Power off Link Set
Access
VIERA Link Settings
Power on Link Set
MENU
28
Select “Setup”
Select “VIERA Link Settings”
2
1
3
Display the menu
∗Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function.
This TV supports “HDAVI Control 2” function.
Connections to some Panasonic equipment (DVD Recorder DIGA, HD Video Camera, Player theatre,
etc.) with HDMI cables allow you to interface them automatically.
The equipment with “HDAVI Control” function enables the following operations: •
Easy playback (p. 29) •
Power on Link (p. 29) •
Power off Link (p. 29) •
Speaker control (p. 29)
In addition, the equipment with “HDAVI Control 2” function enables the following operation: •
Easy control only with VIERA remote control (p. 29)
These features are limited to models incorporating Panasonic’s “HDAVI Control” and “VIERA Link”.
VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry
standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have
developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI
CEC cannot be guaranteed.
Refer to individual manuals for compatibility information. About applicable equipment, consult your local
Panasonic dealer.
4
VIERA Link “ Control
TM
”∗
■
HDMI cable
This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. Recommended part number: •
RP-CDHG15 (1.5 m) •
RP-CDHG30 (3.0 m) •
RP-CDHG50 (5.0 m)
■
Preparations
Setup the equipment to enable this function. Read the manuals of the equipment.
About connections, see “External Equipment” (p. 31). Read the manuals of the equipment too.
■
For the first time / When adding new equipment, reconnecting equipment or changing setup
After connection turn the equipment on and then switch the TV on.
Select the input mode to HDMI1 or HDMI2 (p. 14), and make sure that an image is displayed
correctly.
Main Menu
Select
Access EXIT
RETURN
VIERA Link
Language
Picture
Setup
Sound
Select “VIERA Link” and
set to “On”
select
access
set
select
select
access