MicroNet Technology SP907BB User Manual
Page 14
13
iii.
Check the status of the Connection icon. Click the Connection icon, and you can see
the device name and status under Network Connections. The name of this WLAN
CARD is “USB Wireless LAN Card”, and another one is the original connected device,
“Ethernet card 1”.
PS: (If you have more than 2 connecting devices, please un-plug the Ethernet line and the disappear
Connection icon is the original connected device.)
iv.
Double click the original connected device, and enter into the following window. Click
Properties (1) -> Sharing (2) -> Check “Enable Internet Connection Sharing for this
connection” -> OK
v.
After finishing, the following window shows up. Please choose “Yes”, and the
computer will set your IP address in 192.168.0.1.
1
2
3