MicroNet Technology SP907BB - Manual (Page 15)

14
vi. Double click the WLAN icon in Icon Tray, and enter into the “Software and Utility
window”.
Software and Utility window:
vii. Change to the “Ad-Hoc” mode
1. Under “Monitor window”, click “Change” (1) to modify the Operation Mode to “Ad-hoc”
mode (2).
2. Change the SSID name to “ANY” (3), and then click “Submit” (4) to save this change.
After setting, this WLAN card could be the Gateway for other WLAN devices.
3. Reset your computer.
3. “Computer 2” Setup
A. Double click the WLAN icon in the Icon tray.
B. Under Site survey window, you will see all available connecting instruments. Double click
the item (1) with SSID named “ANY”.
C. Rest computer 2.
1
2
3
4