MaxTech xpvs336i User Manual
Page 4
2
or,
2. If running DOS or Windows 3.x, configure the
modem using the included modem driver. Instructions
for installing this driver are included in the text file called
README.1ST on the Windows 95 driver disk.
The README.1ST file can be viewed by loading it
into any wordprocessor or any text editor (i.e. DOS EDIT,
NOTEPAD). It may also be viewed by using the DOS
TYPE command. Refer to your word processor manual
or DOS/Windows references for information on loading
text files.
2.3
Hardware Installation
Installation of this modem
requires opening and manipulat-
ing your PC. Exercise caution at
all times when working with AC
powered and static-sensitive
equipment. Turn off and unplug
your PC before installation. Dis-
charge any static electricity from
your body by touching any bare
metal surface of the PC system,
such as its power supply cover.
1. Turn off and unplug your com-
puter from the AC outlet.
2. Remove your computer's cover
(refer to your computer's owner's
manual).
3. Select any available half-card slot,
and then remove the slot cover
(refer to Figure 2-1).
4. Carefully slide the internal mo-
dem into the slot you have cho-
sen, applying even pressure until
the modem is completely seated
in the slot.
5. Fasten the retaining bracket with
the screw from the slot cover.
Make sure the modem is prop-
erly aligned. Store the slot cover
for future use.
Figure 2-1
Expansion
Slots
PHONE
LINE
SPK
MIC
Figure 2-2
Back
Plate