Frequently asked questions, Note for output jacks on the rear panel, Troubleshooting – Philips Magnavox E9S80UD User Manual
Page 98: 98 en
98
EN
TROUBLESHOOTING
Symptom
Remedy
VCR
There is no picture.
• If you connect the cable to S-VIDEO OUT/ COMPONENT VIDEO OUT /
HDMI OUT jack, connect it to AUDIO / VIDEO OUT jack instead.
Picture noise appears.
• Head cleaning for VCR may be necessary. Refer to “Auto head cleaning”
(page 5).
• Adjust tracking control for better picture by pressing [CHANNEL / ]
while you are playing back a cassette tape.
The cassette tape does not play back.
• No cassette tape is inserted.
Recording does not start after you press
[REC I].
• Make sure the cassette tape has an erase-protection tab when you
record to a cassette tape. If needed, cover the hole with cellophane
tape.
The remote control does not function.
• Check if a cassette tape is in this unit.
The motor rotates even when
playback / recording is stopped.
• The motor may rotate for the duration of approximately 5 minutes for
efficient operation. This is not a malfunction.
Frequently Asked Questions
– Can I record to CD-RW/-R?
No, this unit records only DVD.
– Can I play back DVD-video that is bought in another
country?
Possible when the region code of the disc is 1 and All.
– Can I connect the unit to my PC?
No, you cannot control the unit by PC.
– Can I program a timer recording with cable/satellite
box?
Yes, you can. Select “L1” or “L2” as your recording channel,
and leave the cable / satellite box on (pages 17, 42-45).
– Can I record one channel while watching another
channel using a cable / satellite box?
It depends on your connection configurations. For more
details, please kindly contact your cable / satellite provider.
– Can I connect this unit directly to a TV which only has
an antenna in jack using an RF coaxial cable?
No. You need an RF modulator (commercially available)
to connect this unit to a TV which only has an antenna in
jack (page 16). This unit does not have an RF modulator.
– Can I change the channels on the cable / satellite box
using the remote control of this unit?
No. Changing the channels on the cable / satellite box using
this unit’s remote control is not possible. You need to use
the remote control supplied with the cable / satellite box to
change the channels on the cable / satellite box.
DVD
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO
OUT
IN
COAXIAL
L
R
L
Y
P
B
/C
B
P
R
/C
R
R
L
R
S-VIDEO
IN --- AUDIO --- OUT
IN --- VIDEO --- OUT
COMPONENT
VIDEO OUT
DVD/VCR
HDMI OUT
OUT
IN
ANTENNA
1
2
4
5
3
6
Note for Output Jacks on the Rear Panel
✔ : Available
: Not available
Available for
DVD mode
VCR mode
Output Jacks
1
HDMI OUT
✔
2
COAXIAL DIGITAL AUDIO OUT
✔
3
AUDIO OUT
✔
4
S-VIDEO OUT
✔
5
COMPONENT VIDEO OUT - interlace
✔
5
COMPONENT VIDEO OUT - progressive
✔
6
AUDIO/VIDEO OUT
✔
✔
E9M81UD_ZV457MG9.indd 98
2008/05/15 14:32:12