Mustek USER'S MANUAL VDC-300 - Manual (Page 9)

9
Power Supply
Installing the Batteries
The camera comes with 4 AA alkaline batteries. Please refer to the
inside of the battery compartment lid or the following illustration to
properly install the batteries.
Using an AC Adapter
To save battery power, you may also use a standard (7.5v/2 amp)
AC power adapter.
To connect an AC power adapter:
• Plug the adapter into an appropriate AC outlet.
• Open the panel and insert the power adapter into the top slot as
shown.
Low-Battery Indicator
When the battery power becomes low, the battery icon will dis-
play and blink in your LCD. To continue to use the camera, either
replace the batteries or connect the AC power adapter. The images
will remain in the camera’s memory for an indefinite period of time.
Note: Extended use of the LCD causes rapid battery usage. There-
fore, we recommend using rechargeable batteries or the AC power
adapter whenever possible.