Philips Magnavox ZC357MGX - Manual (Page 44)

42 EN 42 EN
TIMER RECORDING
4 Use [K / L / s / B] or [the Number
buttons] to enter the start and end
time, then press [B].
Date
JAN/02
CH
DTV69. 1
Mode
SP
Start
12 : 00AM
End
- - : - -
SP 2h00m
• You cannot make a program which recording
time exceeds 12 hours.
5 Use [K / L / s / B] to select analog
(“- - -”) / digital (“DTV”) mode or
external input (L1 / L2), then press
[B].
e.g.) external input mode
Date
JAN/02
CH
L1
Mode
SP
Start
12 : 00AM
End
1 : 00AM
SP 1h00m
To record from external input (e.g., cable/
satellite box), select L1 or L2.
Use [K / L] or [the Number buttons] to select
the channel number to record, then press [B].
For digital mode, select both major and minor
channels. Refer to “How to select a channel
number for the timer recording” on page 43
for more details.
e.g.) analog mode
Date
JAN/02
CH
10
Mode
SP
Start
12 : 00AM
End
1 : 00AM
SP 1h00m
e.g.) digital mode
Date
JAN/02
CH
DTV69. 1
Mode
SP
Start
12 : 00AM
End
1 : 00AM
SP 1h00m
6 Use [K / L] to select a recording
mode.
Date
JAN/02
CH
DTV69. 1
Mode
SP
Start
12 : 00AM
End
1 : 00AM
SP 1h00m
Refer to “Recording Mode” on page 37.
• You can check the remaining recordable space
of the disc when you select the recording mode.
Date
JAN/02
CH
DTV69. 1
Mode
SP
Start
12 : 00AM
End
1 : 00AM
SP 1h00m
Auto recording mode select...
When “Auto” is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available
automatically to complete recording the program.
Date
JAN/02
CH
DTV69. 1
Mode
Auto
Auto
Start
12 : 00AM
End
1 : 00AM
1h00m
• “Auto” is only available for one program in the timer
program list.
• The recording may be cut short when the available
recording space of the disc is too limited.
7 Press [OK] when all items are entered.
After displaying an instructive message for 10
seconds, timer program list will appear.
Press STANDBY-ON to Timer Standby mode.
Timer Programming
THU JAN/01 11:00AM SP (1:00)
JAN/ 2/09 12:00 AM 69.1 SP
Date Start End CH
JAN/02 12:00AM 1:00AM DTV69. 1
Your program setting is now stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER] or [SETUP].
• When 2 or more programs are overlapped,
“Timer program overlapped” appears, and the
overlapped program will be displayed in blue.
• To correct the timer program refer to
“Checking, canceling, or correcting the timer
programming information” on page 43.
8 Press [STANDBY-ON y y ] to set a timer
programming.
TIMER REC indicator will light up on the front
panel.
E7S50UD_ZC357MGX_v1.indd 42 E7S50UD_ZC357MGX_v1.indd 42 2008/12/01 13:57:56 2008/12/01 13:57:56