Philips Magnavox ZC357MGX - Manual (Page 95)

93 EN
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
Others
Español
TROUBLESHOOTING
Symptom Remedy
OTHERS
The unit does not operate
properly. • When static electricity, etc., causes the unit to operate abnormally, unplug
the unit and then plug it in again.
The disc tray does not open when
you press [OPEN/CLOSE A]. • It may take a few seconds for the disc tray to open after you have
recorded or edited a disc. This is because the unit is adding disc data to
the disc.
“Repairing” appears on the TV
screen.
Repairing
• If there is a power failure or unplugging during recording, finalizing,
formatting or editing (even after “Repairing” disappears), a repairing
process will begin automatically just after turning the unit on again.
It may take several minutes up to about several hours.
In a case you intend to cancel the
repairing process. • If you intend to cancel the repairing process, press [A OPEN/CLOSE]
on the front panel, then select “Yes” and press [OK]. After that, press
[OPEN/CLOSE A] to take out the disc. The disc canceled during the
repairing process MAY NOT work.
Repairing
Do you want to cancel a repairing process ?
When selecting “Yes”, the disc may not be
usable.
Yes
No
E7S50UD_ZC357MGX_v1.indd 93 E7S50UD_ZC357MGX_v1.indd 93 2008/12/01 13:59:58 2008/12/01 13:59:58