Motorola T6250 - Manual (Page 31)

Spe
c
ial Fea
tu
re
s
29
Almost all other settings for your radio are done using the same basic key
sequence. Use your radio’s
\ and [ or ] to select and set features the way
you want them. All the features that work using this key sequence are described
on the following pages.
Interference Eliminator Code
The interference eliminator codes help minimize interference and
unwanted messages by providing you with a choice of code
combinations. Refer to the Frequency and Code Charts beginning
on page 46 for channel and code choices.
1.
Press \ twice until the code number display begins to blink.
2. Press [ or ] to set the code, press M to save the code setting.
3. To hear everyone on your channel, select code 0 .
Note: Carrier squelch (0) disables interference eliminator codes. This allows
you to monitor all activity on the channel you are using.
Press Display Then Press
\
the icon representing
the feature you want [ or ] to select the feature, then press M
or wait ten seconds (60 seconds for Simple
Menu mode) to save the setting or press
and hold \.