Motorola T6250 - Manual (Page 45)

Other Impor
tant Featur
es
43
can talk to the person(s) transmitting without having to switch channels by
pressing
M
. To stop scanning, briefly press ) . If you press
M
while the radio is
scanning, the radio will transmit on the channel you selected before you activated
Scan. If no transmission occurs within five seconds, scanning will resume.
If you want to scan channels without interference eliminator codes, change the
code for your set channel to
0 before you briefly press
)
.
Scan List Editing
You can select the channels you want to scan by putting those channels in a scan
list. To edit the scan list, press
\ until h is displayed. Press ] or [ to scroll
through the list of available channels. When you see a channel you want to add
to the list, press
)
until Y is displayed to add it or until n is displayed to to remove
it.
Auto Power Off
You can program your radio to turn itself off after a certain period of
inactivity. This helps save battery life.
To set the automatic power off feature, press \ until O is
displayed. Press [ or ] to set the number of hours
1 - 8 , after which
power shuts off.
8
O