Milan Technology MIL-L800i - Manual (Page 5)

2
„ Auto detect PD and classification of power consumption level
„ Supports manual control of port power detection and classification
„ Support automatic system calibration
„ Support Auto MDI/MDI-X depends on the uplink switch port
„ Centralized power distribution for PoE powered Device (PD)
„ High safety short circuit protection to prevent cable short
„ Supports IEEE 802.3af non-standard device, and supports manual detection of PD
„ Auto refresh port status and support Plug and Play feature for PD
Package Contents
Unpack the contents of the package and verify them against the checklist below.
„ MIL-L800i -- 8 port Power over Ethernet Hub
„ Power Cord
„ RS-232
cable
„ User's
Guide
„ Software Utility CD-ROM
„ Warranty Card
If any item is missing or damaged, please contact your local dealer for service.