Master Lock BUILT-IN COMBINATION LOCKS 1656MKADA - Manual (Page 3)

MASTER LOCK PRODUCT SPECIFICATIONS FEBRUARY 2011
Master Lock Company, 137 West Forest Hill Avenue, P.O. Box 100367, Oak Creek, Wisconsin 53154
TELEPHONE: 800-308-9244; FAX: 800-308-9245; WEBSITE: www.masterlock.com
______________________________________________________________________________
BUILT-IN COMBINATION LOCKS
10 51 61 - 3
1.2 DEFINITIONS
A. ADA Compliant Locks: Locks designed to meet the ADA requirements cited in the
current edition of the DOJ ADA Standards for Accessible Design or ICC/ANSI
A117.1 – Accessible and usable Buildings and Facilities.
B. Control Key: Key provided by lock manufacturer for use with Standard Lock
models that will open any lock in a designated Standard Lock system.
C. Dead bolt lock: Type of lock that once locked, the latch or bolt cannot be retracted
or moved until the lock is properly unlocked by either dialing the correct
combination, or turning a key.
D. Master Key: Key provided by lock manufacturer for use with Three-Ways-to-
Open ADA Compliant Locks that will open any Three-Ways-to-Open ADA
compliant lock in a designated lock system.
E. Slam Shut Operation: Indicates that the locker door will automatically lock by
simply shutting the locker door. No further action is required.
F. Standard Locks: Locks designed for standard use and are not designed to meet
ADA Standards.
G. Student Key: Is a key provided with an ADA lock that allows the user to open one
designated ADA lock.
H. Supervisory Key Access: A key provided by lock manufacturer that provides
access to any lock in a lock system. Standard locks and ADA compliant locks
cannot use the same supervisory key. Standard locks are provided with a Control
Key and ADA compliant locks are provided with a Master Key.
I. Three-Ways– to-Open operation: Indicates that the combination lock can be
opened by use of the correct combination, use of a master key, or use of a student
key.
1.3
SUBMITTALS
C. Provide in accordance with Section [01 33 00 - Submittal Procedures] [insert
section number and title]:
1. Product data for locks.
2. Lock Installation instructions.