Master Lock BUILT-IN COMBINATION LOCKS 1656MKADA - Manual (Page 9)

MASTER LOCK PRODUCT SPECIFICATIONS FEBRUARY 2011
Master Lock Company, 137 West Forest Hill Avenue, P.O. Box 100367, Oak Creek, Wisconsin 53154
TELEPHONE: 800-308-9244; FAX: 800-308-9245; WEBSITE: www.masterlock.com
______________________________________________________________________________
BUILT-IN COMBINATION LOCKS
10 51 61 - 9
ADA Compliant Locks:
ADA Compliant locks offer Three-Way-To-Open Operation
These locks meet the Department of Justice (DOJ) ADA Standards for Accessible
Design (ADA Standards) and ICC/ANSI A117.1: Operation of the lock shall not
require tight grasping, pinching, or twisting of the wrist. The force required to
operate component shall be 5 pounds maximum.
ADA Standards for Accessible Design; per Chapter 2, Article 2.25 – Storage;
requirers providing a minimum of 5 percent ADA Accessible lockers (minimum of
1)
Master Lock recommends only ordering ADA compliant locks to meet the 5
percent minimum ADA Standard, with the remainder of the locks ordered as
standard locks.
Model 1651MKADA: Left-handed with plastic dial.
Model 1656MKADA: Right-handed with plastic dial.
Model 1651MKMDADA: Left-handed with metal dial (MD).
Model 1656MKMDADA: Right-handed with metal dial (MD).
Edit the following to reflect required model. *****
A. General:
1. Description: Built-in combination lock with steel body for single point
horizontal latch lockers.
2. Operation: Lock provides high security by using an extra long locking bolt
without dead bolt locking. Lock uses slam shut operation.
3. Mounting: Concealed in [right] [and] [left] handed locker door.
B. Standard lock:
1. Lock Description: 3 digit combination and 5 preset combination changes with
5 pin tumbler lock cylinder for access using control key.
2. Model: [1652] [1653] [1652MD] [1653MD]