Maretron NETWORK BUS EXTENDER NBE100 - Manual (Page 6)

NBE100 User's Manual
Page 2 Revision 1.0
1.4 Quick Install
Installing the Maretron NBE100 involves the following five steps. Please refer to the individual
sections for additional details.
1. Unpack the box (Section 2.1)
2. Choose a mounting location (Section 2.2)
3. Mount the NBE100 (Section 2.3)
4. Connect the NBE100 (Section 2.4)
2 Installation
2.1 Unpacking the Box
When unpacking the box containing the Maretron NBE100, you should find the following items:
1 – NBE100 – Network Bus Extender
1 – Parts Bag containing 4 Stainless Steel Mounting Screws
1 – NBE100 User’s Manual
1 – Warranty Registration Card
If any of these items are missing or damaged, please contact Maretron.
2.2 Choosing a Mounting Location
Please consider the following when choosing a mounting location.
1. The NBE100 is waterproof, so it can be mounted in a damp or dry location.
2. The orientation is not important, so the NBE100 can be mounted on a horizontal deck,
vertical bulkhead, or upside down if desired.
3. The NBE100 is temperature-rated to 55°C (130°F), so it should be mounted away from
engines or engine rooms where the operating temperature exceeds the specified limit.