Operating instructions, Timer operation, Timer on/off to cancel timer mode – MRV Communications AE09~212FCAKA User Manual

Page 14: Hints, 2)timer mode selection, 3)timer setting, 4)confirming your setting

Advertising
background image

SWING

SET

LOCK

RESET

HEALTH

FAN

T E M P

MODE

SLEEP

CLOCK

TIMER

ON

OFF

1 3

TIMER Operation

Hints:

Set Clock correctly before starting Timer operation.

You can let unit start or stop automatically at following time: Before
you wake up in the morning, or get back from outside or after you
fall asleep at night.

Operation mode will be displayed on LCD.
Power indicator lights up.

(2)TIMER mode selection

Press TIMER button to change TIMER mode.
Every time the button is pressed, display changes
as follows:

Select your desired TIMER mode (ON or OFF)

(3)Timer setting

Press TIME button.

Every time the button is pressed, time increases 10min.
If button is kept depressed, time will change quickly.
Every time the button is pressed, time decreases 10min.
If button is kept depressed, time will change quickly.
Time will be shown on LCD. It can be adjusted within
24hours.

(4)Confirming your setting

After setting correct time, press SET button to confirm
"ON" or "OFF" stops flashing.
Time displayed: Unit starts or stops at x hour x min (ON
or OFF).
Timer mode indicator lights up.

TIMER ON/OFF

To cancel TIMER mode

Just press TIMER button several times until TIMER mode disappears.

Wire controller possesses memory function, when use TIMER mode next time, just
press SET button after mode selecting if timer setting is the same as previous one.

(1)After unit start, select your desired
operation mode.

blank

ON

OFF

ON

OFF

*

ON

MODE

FAN

HEALTH

TEMP

CLOCK

SET

TIMER

SLEEP

RESET

FILTER RESET

ON/OFF

AM

AM

1

SET

1

4

3

2

Please close health function first before setting Timer, then you can do the TIMER ON
operation.Please do not use the health function when in TIMER ON state.

According to the seting timing open, close sequence, can realize first open then colse the unit or
first close then open the unit.

Wire remote controller or remote controller can memorize each working condition. Next
time open the unit, only need to press the ON/OFF key, the AC can work according to
last time working condition.(Timing, Sleeping and Swing mode not included.)

From Timing close to timing open, can setting sleep mode.

Operating Instructions

FRESH

LIGHT

3

4

2

SWING

Advertising
This manual is related to the following products: