Maretron ENGINE MONITORING SYSTEM EMS100 - Manual (Page 6)

EMS100 User’s Manual
Page 2 Revision 1.1
• GM
Series
• YM
Series
• JH
Series
• LH
Series
• LP
Series
• LY
Series
The EMS100 has the following additional features:
• Waterproof Enclosure and Cable System
• Connects to Analog or Digital tachometers
• Can Work With or Without Existing Analog Gauges
1.4 Quick Install
Installing the Maretron EMS100 Engine Monitoring System involves the following five steps.
Please refer to the individual sections for additional details.
1. Unpack the Box (Section 2.1)
2. Choose a Mounting Location (Section 2.2)
3. Mount the EMS100 Engine Monitoring System (Section 2.3)
4. Connect the EMS100 Engine Monitoring System (Section 2.4)
5. Configure the EMS100 Engine Monitoring System (Section 2.5)
2 Installation
2.1 Unpacking the Box
When unpacking the box containing the Maretron EMS100, you should find the following items.
• 1 – EMS100 Engine Monitoring System
• 1 – EMS100 User’s Manual
• 1 – Warranty Registration Card
If any of these items are missing or damaged, please contact Maretron.
2.2 Choosing a Mounting Location
The EMS100 is mounted between the engine and the NMEA 2000
®
network. Please consider
the following when choosing a mounting location.
1. The EMS100 is waterproof, so it can be mounted in a damp or dry location.
2. The orientation is not important, so the EMS100 can be mounted on a horizontal deck,
vertical bulkhead, or even upside down if desired.
3. The EMS100 is temperature rated to 55°C (130°F), so it should be mounted away from
engines or engine rooms where the operating temperature exceeds the specified limit.