Philips Magnavox CMWV405 - Manual (Page 3)

- 3 - EN
2
1
3
4
1
2
3
5
6
7
8 To exit the
CLOCK SET screen
5 To exit the
menu
4
3
2
3. Preparation for Use
LANGUAGE SELECT
B ENGLISH [ON]
FRANCAIS
ESPAÑOL
Hint
• Repeat these steps only if either there
was a power failure or if this unit has been
unplugged for more than 30 seconds.
1 Turn on the TV and set it
to channel 3.
• If channel 3 is already occupied
for broadcasting, see “RF Output
Channel” section on page .
STANDBY-ON
STOP PLAY
CH 0
AUTO SET UP
F.FWD
To Select a Channel
You can select a channel by using
the Number buttons on the
remote control.
Notes for using the Number buttons:
• When selecting cable channels
which are higher than 99, enter
channel numbers as a three-digit
number (for example: 7, press
[1], [1], [7]).
• You must precede single-digit
channel numbers with a zero (for
example: 02, 03, 04 and so on).
To Preset the Channel Again
) Press [MENU] until the main
menu appears.
2) Select "CHANNEL SET UP" by
pressing [PLAY B] or [STOP C].
Then, press [F.FWD g].
3) Select "AUTO SET UP" by
pressing [PLAY B] or [STOP C].
Then, press [F.FWD g]. After
scanning, the tuner stops on the
lowest memorized channel.
To Change the On-Screen
Language
) Press [MENU] until the main
menu appears.
2) Select "LANGUAGE SELECT" by
pressing [PLAY B] or [STOP C].
Then, press [F.FWD g].
3) Select "ENGLISH", "FRANCAIS"
or "ESPAÑOL" by pressing
[PLAY B] or [STOP C]. Then,
press [C.RESET/EXIT].
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
B CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
MENU
CHANNEL SET UP
AUTO SET UP
B MANUAL SET UP
STOP PLAY
STOP PLAY
F.FWD
F.FWD
STOP PLAY
F.FWD
MANUAL SET UP
CHANNEL 30 (CATV)
DELETE
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
B CLOCK SET
LANGUAGE SELECT
MENU
STOP PLAY
F.FWD
F.FWD
CLOCK SET
MONTH DAY YEAR
 0 / – – – – – –
HOUR MINUTE AM/PM
– – : – – – –
STOP PLAY
F.FWD
CLOCK SET
MONTH DAY YEAR
 0 / 0 2 – – – –
HOUR MINUTE AM/PM
– – : – – – –
STOP PLAY
F.FWD
CLOCK SET
MONTH DAY YEAR
 0 / 0 2 2 0 0 6
HOUR MINUTE AM/PM
– – : – – – –
STOP PLAY
F.FWD
CLOCK SET
MONTH DAY YEAR
 0 / 0 2 MON 2 0 0 6
HOUR MINUTE AM/PM
0 5 : – – – –
STOP PLAY
F.FWD
CLOCK SET
MONTH DAY YEAR
 0 / 0 2 MON 2 0 0 6
HOUR MINUTE AM/PM
0 5 : 4 0 – –
STOP PLAY
CLOCK SET
MONTH DAY YEAR
 0 / 0 2 MON 2 0 0 6
HOUR MINUTE AM/PM
0 5 : 4 0 P M AM
B PM
Hint
• To go back one step, press [REW h]
(during steps 2 to 7).
• Your clock setting will be lost if either there
is a power failure or if this unit has been
unplugged for more than 30 seconds.
REW
F.FWD
Hint
• If you accidentally select Spanish
or French and need English: Press
[MENU] and choose SELEC. IDIOMA,
or SELECTION LANGUE. Press
[F.FWD g] and select ENGLISH.
Finally, press [C.RESET/EXIT].
Select “ADD” or “DELETE”.
Select the channel to be
added or deleted.
C.RESET
EXIT
Select the current month.
Select the current day.
Select the current year.
Select “AM” or “PM”.
Select the current hour.
Select the current minute.
No
Clock Set Up To Add/Delete Channels Turn on the Unit for the First Time
TV Screen Remote Control
Yes Press [MENU]
to exit.
• Refer to “Hint for Cable Box or
Satellite Box” section on page .
No Please wait for a few minutes.
After scanning...
• The tuner stops on the lowest memorized
channel.
• You can select only the channels memorized
in the unit by using [CHANNEL ].
• If "AUTO SET UP" appears on the TV
screen again, check the cable connections.
Then, press [F.FWD g] once again.
MANUAL SET UP
CHANNEL 30 (CATV)
ADD
F.FWD
• If the clock is not set,
the CLOCK SET screen
appears when you press
[MENU]. In this case, go
to step 2.
or
or
or
or
or
STOP PLAY
or
or
or
or
or
or
or
Do you connect the cable from the cable box
or the satellite box to the VCR’s ANT-IN jack?
Yes
CMWV405_HJ34RCD_EN.indd 3 2006/0/23 6:20:29