Miele F1411SF - Manual (Page 30)

Re-setting the filter indicator
The filter indicator still flashes in the
display.
^ Touch the access button "p" so it
turns yellow.
^ Note the position of the button X, but
do not touch.
^ Touch the access button "p" again so
it turns white.
Only the access button " p" is visible.
^ Place one finger on the position of
the
X button and hold (the X button
will not be visible).
^ While holding down the X button,
press the access button " p" once.
Keep holding the
X button down until
the following appears in the display
(approx. 5 seconds).
^ Tap the X button until an ^ appears
in the display.
^ Touch the access button "p" again.
By touching the
X button you can
select the following settings:
^ 0: filter is installed
^ 1: filter is not installed (external filter)
^ 2: filter change confirmed
^ -: return to menu
^ Tap the
X button until ^ 2 appears in
the display.
^ 1 should only be selected if an
external filter or bypass cartridge is
being used. See "Deactivating the
water filter".
^ Press and hold the access button "p"
for 2 seconds to confirm the filter
change.
The filter is now reset.
Water filter
30