Miele F1411SF - Manual (Page 68)

MasterCool control panel options for RemoteVision
Selectable
options
Description of function
;
-
Back
;
2
Reboot the module
;
3
Reset the module to factory settings
;
4
Enter Ad-Hoc Mode
Note: If you cannot select any option (other than ;
- "back"), the module has not
been installed correctly.
Status indicators Description of function
Flashing ;
~
Module booting phase
Flashing ;
|
Connection to router established, no IP address assigned
Flashing ; < In Ad-Hoc Mode, not connected
Solid
; =
In Ad-Hoc Mode, connected
Flashing ;
‡
No connection to Network
Solid
;
#
Connected to Network
RemoteVision
68