Miller Electric pmn - Manual (Page 17)

OM-228 305 Page 13
4-6. Connecting Gas/Air Supply
802 787-A / Ref. 801 319-C / Ref. 804 486-A
.
Use only clean, dry air with 90
to 120 psi (621 to 827 kPa)
pressure.
1 Gas/Air Inlet Opening
2 Hose
3 Teflon Tape
Obtain hose with 1/4 NPT right-
hand thread fitting. Wrap threads
with teflon tape (optional) or apply
pipe sealant, and install fitting in
opening. Route hose to gas/air
supply.
4 Air Filter/Regulator
Adjust gas/air pressure according
to Section 5-1.
Tools Needed:
5/8, 1-1/8 in
3
1
2
From Gas/Air
Supply
4