Motorola MVME2400 - Manual (Page 104)

6-2 Computer Group Literature Center Web Site
Modifying the Environment
6
CNFG - Configure Board Information Block
Use this command to display and configure the Board Information Block,
which is resident within the NVRAM. The board information block
contains various elements detailing specific operational parameters of the
MVME240x. The board structure for the MVME240x is as shown in the
following example:
The parameters that are quoted are left-justified character (ASCII) strings
padded with space characters, and the quotes (“) are displayed to indicate
the size of the string. Parameters that are not quoted are considered data
strings, and data strings are right-justified. The data strings are padded
with zeroes if the length is not met.
The Board Information Block is factory-configured before shipment.
There is no need to modify block parameters unless the NVRAM is
corrupted.
Refer to the MVME2400-Series VME Processor Module Programmer’s
Reference Guide for the actual location and other information about the
Board Information Block.
Refer to the PPCBug Firmware Package User's Manual for a description
of CNFG and examples.
Board (PWA) Serial Number = “MOT00 xxxxxxx ”
Board Identifier = “MVME2400 ”
Artwork (PWA) Identifier = “01-w3394F xxC ”
MPU Clock Speed = “350 ”
Bus Clock Speed = “100 ”
Ethernet Address = 08003E20C983
Primary SCSI Identifier = “07”
System Serial Number = “ nnnnnnn ”
System Identifier = “Motorola MVME2400”
License Identifier = “ nnnnnnnn “