Magnadyne MV1020 - Manual (Page 6)

Turning the Unit On:
Press the POWER on either the remote or the
screen housing.
Adjusting the Monitor:
1. Press the MODE button on the remote to
activate the monitor adjustment menu. The
following will be displayed on the screen:
2. Press the MODE button again to select the
adjustment bar.
3. Use the UP and DOWN buttons on the
remote to adjust the screen’s brightness.
4. Press the MODE button again then the
DOWN button to select the next desired
monitor adjustment item:
• Saturation
• Contrast
• Hue
• FM (Wireless Transmitter Frequency)
• Rotate
• Source (DVD or AVIN)
• SD Card
• Reset (Reset to factory settings)
5. Press the MODE button again until the EXIT
item appears or wait 10 seconds and the
menu will automatically disappear.
Inserting a DVD/CD
To play a DVD/CD, insert a disc into slot with
label side facing forward.
Inserting a SD Card
To play a SD card, insert a card into slot with
label side facing forward.
Selecting the SD Card Format
Once the SD card is inserted push the SD but-
ton on the remote. The screen will prompt you
to select the format for the inserted SD card.
Use the or button on the remote to select
the desired format. Once you have selected
the desired format press the ENTER button.
Note: To go back to this selection screen,
press the STOP button twice and then press
the TITLE button.
Note: Large video files will take extra time to
Load/Buffer before video playback begins.
Screen and DVD/CD Functions
BRIGHTNESS BRIGHTNESS 01/10 01/10
25 25
6
Label Side
Facing Forward
Label Side
Facing Forward
Changing to an Auxiliary Input Source
Press the SOURCE button to change the play
source between DVD/CD player and a Auxiliary
Input Source.
Format Selection Format Selection
1:Audio/Picture 1:Audio/Picture
2:Video File 2:Video File