Philips Magnavox 51MP6200D User Manual

Page 12

Advertising
background image

4

75

conn us entry05 cable.eps

CABLE

Cable box with S-Video, component video (YPbPr) or HDMI connectors

See Connect Accessory Devices, p. 2-22.

Antenna

Via antenna you can watch whatever DTV programs being broadcast in your area

for free.

If you’re not sure what HDTV programming is available in your area, contact your

local content provider or your local electronics store retailer.

Broadcasters are in the middle of a transition from analog to digital TV. This means

that a given broadcaster will have two channels on the air, one analog and one

digital.

Connect the incoming antenna signal to the CABlE/ANTENNA 75

Ω

x jack at the bottom of the TV. See page 8 for details on using Autoprogram to

store channels in the TV’s memory.

Note: This connection will supply stereo sound to the TV if it is being broadcast by the

station you are watching.

Direct Broadcast Satellite (DBS)

Satellite systems offer many of the same premium channels as cable systems, and

often at a lower price. To get these channels, you’ll need to install a small dish

antenna outside.

There are 2 main DBS systems: DirecTV & DishNetwork. These systems require

separate, proprietary set top receiver boxes to decode their signals and send them

to your digital TV set. These boxes may include a digital TV tuner for off-air DTV

broadcasts.

Satellite broadcasters also provide major local channels, depending on the market

in which you live.

DBS also provides service in areas not covered by cable because they are in rural

areas or other areas not passed by a cable line.

DBS also allows you to watch pay-per-view events.

é

Before installing your TV or before hanging it on the wall, connect all your

accessory devices. See p. 20.

Refer to the bottom of the set for the correct operation voltage. Insert the power

cord in the wall socket.

Consult your local dealer if your mains supply is different. To prevent damaging the

mains (AC) cord which could cause a fire or electric shock, do not place the TV

on the cord.

Remote control:

Insert the 2 batteries supplied (Type R6-,5V). Be sure the (+) and (-) ends of the

batteries line up correctly (inside of case is marked.)

The batteries supplied do not contain the heavy metals mercury and cadmium. Please

check on how to dispose of exhausted batteries according to local regulations.

(

Turn the TV on:

Press the power switch . at the front of the TV. You may also press CH+/- or

PoWER button on the remote control.

An indicator on the front of the TV lights up.

Advertising