Magellan CrossoverGPS 980890-05 - Manual (Page 12)

Magellan Crossover GPS 2
Magellan CrossoverGPS Reference Manual
It is not necessary to read this entire document to begin using the Magellan
CrossoverGPS. Most users will find that they can use the Magellan CrossoverGPS straight
out of the box and just refer to this manual on those rare occasions when a little help on a
feature is required.
Magellan CrossoverGPS
The Magellan CrossoverGPS uses a touchscreen display for all user inputs. The only
readily accessible button that is normally used is the power button located on the right
side of the unit.
You will need to press and hold the power button down for a few seconds to turn the
Magellan CrossoverGPS on. This function prevents the unit from accidentally switching
on.
To turn the Magellan CrossoverGPS off, you will need to press the power button down
again for 1 second if you want to put it into sleep mode or for 3 seconds to completely
switch it off.
All connections to the Magellan CrossoverGPS are located on the left and right sides of
the unit, protected by a rubber covering to keep out moisture. When you need to access
the connectors, simply lift the protective cover from the bottom.
Power