Magellan CrossoverGPS 980890-05 - Manual (Page 33)

Magellan CrossoverGPS Enhanced POIs 21
Displaying/Selecting Categories
1. Load a POI file as described in ‘Loading a My POI file’.
2. Select Display Categories.
3. Select the POI categories you want to be displayed on the map screen.
Setting Alarms
1. Load a POI file as described in ‘Loading a My POI file’.
2. Select Set Alarms.
3. Select the categories you want to be alerted to when approaching. (See Setting
Alert Parameters.)
Setting Alert Parameters
1. Load a POI file as described in ‘Loading a My POI file’.
2. Select Alert Parameters.
3. Select the category you want to set the parameters for.
4. Select the Detection angle by selecting the detection angle button and entering a
new angle [default is 45 degrees]. (This is the area in front of you that will be used
to identify whether one of your POIs is upcoming.)
5. Set the distance for the first and last warning by pressing on their respective
buttons and entering the desired distance.
6. Select Save when complete.
Creating a Route Using My POI
1. Load a POI file as described in ‘Loading a My POI file’.
2. Select Select category.
3. Select the POI category.
4. Select Nearest (closest to your present position) or Spell POI Name.
5. If you selected Nearest, select the destination from the Select POI list.
If you selected Spell POI Name, enter the first few letters for the desired POI and
press OK. Select the POI from the list.
6. Select Route.
7. Select the routing method.