Fuses and relays, Fuses, Roadside emergencies – Mazda 2008 B2300 Truck User Manual

Page 169

Advertising
background image

The fuel pump shut-off switch is
located on the right side of the
passenger footwell, behind the fuse
panel door.

To reset the switch:

1. Turn the ignition OFF.

2. Check the fuel system for leaks.

3. If no leaks are apparent, reset

the switch by pushing in on the
reset button.

4. Turn the ignition ON.

5. Wait a few seconds and return

the key to OFF.

6. Make another check for leaks.

FUSES AND RELAYS

Fuses

If electrical components in the
vehicle are not working, a fuse may
have blown. Blown fuses are
identified by a broken wire within
the fuse. Check the appropriate
fuses before replacing any electrical
components.

Note:

Always replace a fuse with one that has the specified amperage

rating. Using a fuse with a higher amperage rating can cause severe wire
damage and could start a fire.

15

2008 B-Series (mbs)
Owners Guide (post-2002-fmt)
USA
(fus)

Roadside Emergencies

169

Advertising