Metz LCD-TV - Manual (Page 35)

35
16.2 Recording Control Opening the menu
This menu item is not available in a 2 **
menu.
In the menu item "Recording control", you can set a
lead time and an overrun time for timer recordings.
The TV set is automatically switched to the pro-
gramme position from which the recording is to
be made at a time which is the number of minutes
programmed as the lead time before the pro-
grammed starting time for the recording.
At the end of the programmed recording time, the
TV set remains set to this programme position for
the period programmed as the overrun time.
For VPS recordings, the TV set is automatically
switched to the programme position from
which the recording is to be made at a
time which is the number of minutes pro-
grammed as the VPS lead time before the
programmed starting time for the recor-
ding. By default, the TV set switches to
this programme position about one hour
before the programmed start time for a
VPS recording.
Setting the lead time, VPS lead
time and overrun time
• Press the "MENU" key to open the TV
menu.
• Press the green key to open the "Timer" menu.
• Use the corresponding numeric key (in the exam-
ple:
´
) to select the menu item "Recording con-
trol".
• Use the cursor control key to select the desired
menu item.
• Press the "OK" key and then, in the setting win-
dow, use the - + key to set the desired lead or
overrun time.
• Press the "OK" key to save the settings.
• Press the "EXIT" key to close the TV menu.
☞
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
Lead time with VPS
Overrun time
Lead time
Recording control
Timer setting
Timer control
Reminder
Childlock
Lead time with VPS 5 min
Change with
Accept value with
OK
– +
MENU
OK
EXIT
OK
ᕥ
606 47 2014.A1 LCD-GB MK 22.06.2006 14:13 Uhr Seite 35