Metz LCD-TV - Manual (Page 37)

37
In the case of TV sets with one front end, the pic-
ture in picture function (PIP) can only be used for
the superimposition of an AV set.
In this regard, the following superimposition
options are possible:
If an analogue TV station is displayed on the
screen
, it is only possible to call up the picture of
an AV set, which is connected either to the
“HDMI” or the “DVI-D” socket.
If a digital TV station (DVB-C or DVBT) is display-
ed on the screen
, it is possible to call up the pictu-
re of any AV set, regardless of the socket it is con-
nected to.
In the case of TV sets with two front ends, it is
possible to call up a different analogue program-
me or the picture of any AV set, regardless of the
socket the set is connected to.
Activating the PIP function
• The F1 key is pre-programmed with the picture-
in-picture function.
• You can use the cursor control keys
̇ ̈ to move the PIP picture on the
screen. The last position to which this
picture was set is saved.
• By pressing the "OK" key, you can set
the frame of the PIP picture to active
(red) or inactive (white).
• The contents of the PIP picture can be
changed only if its frame is active
(red). If this is the case, you can use
the numeric keys or the "P+/P-"
rocker key to select a different AV
programme position.
17. Special Functions
Picture-in-Picture
Opening the menu
F1
606 47 2014.A1 LCD-GB MK 22.06.2006 14:13 Uhr Seite 37