Magnadyne MV1025 - Manual (Page 14)

14
Only qualified service personnel can remove the
cover or service this player. Otherwise the warranty
will become invalid.
No Power:
• Check to see if the player is “On”.
• Check to see that the power plug of the main unit
is properly connected.
• Check to see if that power to the outlet is properly
working.
No Picture:
• Check to see that the monitor is switched “On”.
• Check that the correct Mode is selected (DVD or
AV) by pushing the MODE button.
• Check the audio/video in connection.
Distorted Picture:
• Check the disc for fingerprints and clean with soft
dry cloth, wiping from center to edge.
• A small amount of picture distortion may appear.
This may not be a malfunction.
No Sound:
• Check audio connections.
• Be sure the headphones are turned on, some
headphones automatically shut off.
• Be sure the headphone batteries are not depleted.
• Check the volume and mute setting on both the
monitor and headphone.
Disc Does Not Play:
• Ensure the disc label is facing up.
• Clean the disc.
• Check to see if the disc is defective by trying
another disc.
• The disc format is not supported by this unit.
The Player Does Not Respond to the Remote Control:
• Aim the remote control directly at the sensor on
the front of the housing.
• Avoid all obstacles which may interfere with the
signal path.
• Inspect or replace the remote control batteries.
• Check that the battery is inserted correctly.
Buttons Do Not Work:
• Press POWER to turn “Off” the unit, then press it
again to turn “On” the unit.
Volume different for DVD and CD:
• This is due to different recording methods
Troubleshooting
MV1025-UM.qxp 7/6/06 16:11 Page 14