Magnadyne MV1025 - Manual (Page 6)

Turning the Unit On
Press the POWER on either the remote or the screen
housing.
Adjusting the Monitor
1. Press the MENU button on either the remote or the
screen housing to activate the monitor adjustment
menu. The following will be displayed on the screen:
2. Press the MENU button again to activate the
Brightness menu. An adjustment bar will appear
at the bottom of the menu screen.
3. Use the UP and DOWN buttons on either the
remote or the screen housing to adjust the screen
Brightness.
4. Press the MENU button again to deselect the
Brightness adjustment bar.
5. Use the UP and DOWN buttons on either the
remote or the screen housing to select the next
video adjustment category.
6. Select EXIT in the menu or wait 10 seconds and
the menu will automatically disappear.
Inserting a DVD/CD
To play a DVD/CD, insert a disc into slot with label
side facing up.
Last Memory
After the engine is turned “Off” or the unit is powered
“Off”, the unit will resume play at the point play was
interrupted when the unit is turned back on again.
Screen and DVD/CD Functions
Screen’s Remote
Control Sensor
Label Side Up
Screen’s Remote Control Sensor
Screen’s remote control sensor receives the remote’s
infrared control signals.
6
MV1025-UM.qxp 7/6/06 16:11 Page 6