Philips Magnavox mrd210 - Manual (Page 20)

18
English
Continue playback from the last stop point
● In stop mode and when a disc has not been removed, press
RESUME on the remote to resume playback from the
point at which it stopped.
To cancel the resume mode
● Press Ç again.
Helpful Hints:
– Open the disc tray or disconnect the system from the
power supply will cancel the resume option.
– For VCD, the resume option is only possible if the PBC mode
is turned on.
– The resume option may not be available on some discs.
Repeat play
You can only select the repeat play mode during playback.
For DVD - Repeat chapter/title/disc
● Press REPEAT repeatedly to select the following :
➜ “R-1” – repeat chapter.
➜ “R-A” – repeat title/disc.
For VCD/CD/MP3-CD - Repeat track/disc
● Press REPEAT repeatedly to select the following :
➜ “R-1” – repeat the current track.
➜ “R-A” – repeat the entire disc.
Helpful Hints:
– Repeat play might not work correctly with some DVDs.
– For VCD, repeat play is not possible during PBC playback.
Repeat A-B
You can play a specific section in a track/chapter repeatedly.
1 Press REPEAT A-B on the remote at your chosen
starting point.
2 Press REPEAT A-B again at your chosen end point.
➜ The passage will now repeat continuously.
3 To resume normal play, press REPEAT A-B again.
Helpful Hint:
– The section A and B can be set only within the same
chapter/track.
Program favorite tracks
You can play the contents of the disc in the order you want
by programming the order of the tracks to be played. Up to
99 tracks can be stored.
Helpful Hint:
– Program DVD and MP3-CD is not possible.
Using the display screen
1 While playback is stopped, press PROGRAM to enter
program mode.
➜ “P 00:::::00” appears.
2 Use the numeric keypad (0-9) to input the track
number in the order you want.
➜ "FULL" will appear if 99 tracks have been programmed.
3 Press OK to store the track.
● Repeat steps 2-3 to store other tracks.
4 To start program play, pressÉÅ .
5 To stop playback, press Ç once.
6 To cancel the program, press Ç again in stop mode.
Using the menu bar
IMPORTANT!
You have to turn on your TV and set to the
correct Video In channel (see page 12 - Switching
on the system.)
1 Stop playback, then press SYSTEM MENU.
➜ The menu bar will appear across the top of the TV
screen.
2 Use 2 keys to select and press 4 to enter the program
menu.
PROGRAM P 00 : 00
3 Use numeric keypad (0-9) to enter the disc and track
number to be programmed.
4 Press ÉÅ to start program playback.
5 To stop playback, press Ç once.
6 To cancel the program, press Ç again in stop mode.
D
ISC
O
PERATIONS