Moxa Technologies NPort 6110 - Manual (Page 25)

4-4
When the Search by IP Address window opens, input the IP address of the
NPort 6110 you want to search for, and then click OK.
If the search is successful, information related to the NPort 6110 will be
displayed in the Modbus Gateway Configurator window.
NOTE If using the Search by IP Address function fails to locate the NPort 6110,
one possible reason is that the IP address you entered to conduct the
search is incorrect. Try retyping the IP address and then redo the
search.
Another possibility is that the NPort 6110 is located on the same LAN as
the host, but on a different subnet. In this case, you can change the IP
address and/or Netmask of the host so that it is on the same subnet as the
NPort 6110.
Modify Configuration
To modify the configuration of an NPort 6110, first click on the row associated
with the NPort 6110 whose configuration you want to modify (to highlight the
row, as shown in the following figure). Next, click on the Modify
Configuration toolbar icon, or select Modify Configuration under the
Configuration menu.