Metra Electronics 95-5026 - Manual (Page 8)

95-5026
KIT ASSEMBLY
6
2
A
Slide the DDIN radio unit into the
trim plate bracket assembly and
secure the unit to the kit using the
screws supplied with the head unit.
(Figure B)
3 Position the rear support bracket
with slide grooves facing down and
secure to the back of the aftermar-
ket radio with the hardware supplied
with aftermarket head unit.
(Figure C)
Slide the appropriate bracket into
the trim plate aligning the holes in
the trim plate to the clips on the
bracket. (Figure A) 1
B
C
DOUBLE DIN HEAD UNIT PROVISION