Metra Electronics 95-5026 - Manual (Page 9)

95-5026
KIT ASSEMBLY
7
2
A
Slide the stacked ISO DIN units into
the trim plate bracket assembly and
secure the units to the kit using the
screws supplied with the head units.
(Figure B)
3 Position the rear support bracket
with slide grooves facing down and
secure to the back of the aftermar-
ket radio with the hardware supplied
with aftermarket head unit.
(Figure C)
Slide the appropriate bracket into
the trim plate aligning the holes in
the trim plate to the clips on the
bracket. (Figure A) 1
B
B
STACKED ISO DIN HEAD UNIT PROVISION